We have designed the Scenic Integration Box to eliminate those awkward visual cues, where you can’t quite see the switches on set, or perhaps you wish to provide control of scenic elements or power to people who aren’t near the lighting desk. With this clever little box, you can connect up to two switches with no dangerous voltages exposed at any point, allowing switch integration with any practical or scenic element you with to connect to.
The Scenic Integration Module simply connects to your existing lighting network and is natively powered by 802.3af PoE. If you do not have access to PoE, we have added a small DC Jack on the side to allow for multiple power options. Once connected to your lighting network, it will broadcast macros to the lighting desk via OSC, depending on the state of the switches. So it’s up to you what you create, we simply provide the solution!
The Scenic Integration module takes advantage of 802.3af PoE, meaning you only need to run one cable to the module. There is also the option of powering via DC jack if PoE is not avaliable.
We have configured the Scenic Integration Module to conform with ETC's reccomended IP ranges, meaning this device will integrate perfectly with your existing lighting network.
Wire up to two switches into our Scenic integration module, ready to control your practicals or scenic lighting.
The Scenic Integration Module will come pre-configured conforming to your requested macros and Ip addresses, if our default settings do not suit your specific needs.
| Connectivity | Ethernet |
| Power | PoE or 2.1mm DC Jack |
| Protocol | OSC |
| Supported Software | QLab & EOS |
| Dimmensions | 170 x 85 x 60.5 mm |
| Inputs | 2 x Dual screw terminals |
